Striproll Suredek™ 700 is an open rib interlocking tray deck roofing product featuring a concealed fixing system. Made from modern high tensile steel, Suredek™ 700 is available in the
full range of standard COLORBOND® steel colours and is custom cut to your length requirements.

Fix to Australian Standards handbook HB39. Maximum recommeneded sheet length without expansion joint 22.0 meters. Must be fixed to a flat and level plane without deviation in the alignment of supports. For further details contact Striproll sales office.

Spring curving this product is not recommended.

Striproll Suredek™ 700 is available in:

Colorbond® (22 standard colours)
Colorbond MATT® (6 standard colours)
Colorbond® Ultra (8 standard colours)
Zincalume®
Galvanised

Delivery, Handling and Storage:
Normally delivered to the building site in strapped bundles. If not required for immediate use, sheets or bundles should be neatly stacked clear of the ground and if left in the open, should be protected by loose but secure tarpaulins or similar cover.
On no account should bundles be left exposed to the weather. Rain or condensation are easily drawn in between tightly nested sheets by capillary action, and because of this moisture not being able to evaporate naturally, unsightly stains can be caused which can detract seriously from the finished appearance of the installation.
It is the customer's responsibility to be present or have a representative present, to accept the product in good order and condition upon delivery. The customer is also responsible for unloading their goods.
In the event of an unattended site, our driver will endeavour to unload as close to the site as possible. In these instances Striproll will not accept claims for damages to the product, property or injury caused during unloading, nor claims for pilferage of part or all of the delivery made. Any additional costs will be charged to the customer's account.